Tree Felling Tableview is some of the most wind-exposed work in the metro. Trees are wind-shaped, root plates are shallow in loose sand, and a lean that has changed should be treated as urgent.
Tree Felling Tableview is wind and sand. Trees here are shaped by the south-easter, rooted in loose ground, and they lean or lift long before they show any sign of ill health.
What the Job Involves
Access is generally the easy part: newer stands, wider streets, and room for a vehicle near the tree. That tends to keep costs at the lower end of the ranges below compared with the mountain suburbs.
Sandy ground makes stump grinding quick, but it also means root plates are shallow and a leaning tree can move suddenly. A tree that has shifted after a front should be treated as urgent.
Send the area, a rough height and a photo of the tree taken from a few metres back. Companies covering Tableview quote you directly.
Get 5 QuotesTrees We Get Called To
- Pine — Wind-thrown and leaning. The common removal.
- Bluegum — Invasive, and brittle in the wind here.
- Palms — Widely planted in newer developments.
- Coastal garden trees — Salt-burnt and wind-shaped, often needing reduction rather than removal.
- Rooikrans and Port Jackson — Declared invasives on open ground, usually cleared by area.
Tree Felling Tableview Price Guide
| Job | Indicative range | What moves it |
|---|---|---|
| Small tree, up to 5 m | R850 – R2 500 | Open access, one drop zone |
| Medium tree, 5 – 10 m | R2 500 – R6 500 | Whether it can be dropped whole |
| Large tree, 10 – 20 m | R6 500 – R15 000 | Rigging, roof and wall clearance |
| Very large tree, 20 m+ | R12 000 – R25 000+ | Crane or MEWP hire if needed |
| Sectional dismantle near a structure | +30% – 60% | Every piece lowered on ropes |
| Stump ground out afterwards | R600 – R3 000 | Diameter and machine access |
| Green waste removal | R650 – R3 500 | Bakkie load through to truck load |
These are indicative market ranges, not a quotation. They are compiled from published South African tree service pricing to give you a starting point for budgeting. They are not the rate card of any company on this platform, and no figure here is a commitment by anyone.
A tree that is close to a house, a boundary wall or power lines is priced on the rigging and the risk rather than on its height, so two trees of the same size on different properties can quote very differently. An on-site look is what turns a range into a number.
What Pushes the Price Up in Tableview
- Whether the tree is leaning or already moving, which makes it urgent work
- Volume of invasive material on open plots, priced by area
- Wind days, which stop climbing work
- Distance to a green waste site for haulage
Permits and Protected Trees
Three separate rules decide whether a tree can legally come down in Tableview. Species protected under the National Forests Act need a permit from the national department before removal, whoever owns the land. Trees on verges, pavements and other municipal ground belong to the City of Cape Town rather than to the adjoining owner, so those are a call to the municipality and not to a contractor. Declared invasive species run the opposite way — there is a legal duty to control them, which is why bluegum, Port Jackson and rooikrans removals are rarely refused.
Estates, body corporates and homeowners' associations frequently add their own approval process on top of the municipal one. Check which of the three applies before booking, not after.
Not sure whether your tree needs a permit? Describe it in the quote request and ask the companies that respond — it costs nothing to check.
GET A QUOTEOther Work in the Area
Tableview is one area within the wider service coverage. For the full breakdown of methods, species and pricing, start at Tree Felling Cape Town.
Frequently Asked Questions
How much does tree felling in Tableview cost?
Most residential jobs land between R2 500 and R15 000. The band depends far more on what is underneath the tree than on the tree itself — a 12 m tree with a clear drop zone is a fraction of the cost of the same tree overhanging a roof, because the second one has to come down piece by piece on ropes.
Can a tree be felled close to my house?
Yes, but not by dropping it. It gets climbed or reached with a MEWP and taken down in sections, each piece roped and lowered rather than allowed to fall. That is slower and costs more, and it is the correct method when there is a roof, a boundary wall, paving or a pool underneath.
Do you take the wood away?
Ask before you accept a quote — this is the most common reason two quotes differ. Some include full removal of timber and brush, some leave the wood stacked on site, and some charge separately for haulage. Get it in writing either way.
What about the stump?
Felling normally leaves a stump at ground level. Grinding or excavating it out is a separate line item. If you are going to pave, plant or build over the spot, deal with the stump in the same visit — bringing a machine back later costs more than doing it while the crew is on site.
My tree is leaning after a windy week. Is that an emergency?
If the lean has changed, if soil is lifting on one side of the base, or if it leans towards a structure, treat it as urgent and keep people out from underneath it. A long-standing lean that has not moved is usually not an emergency and can be booked normally, which costs considerably less. See emergency tree removal.
How do I get quotes for Tree Felling Tableview?
Describe the tree once — rough height, what is underneath it, and how close a vehicle can get — and add a photo taken from a few metres back so the whole tree is in frame. Companies covering the area receive it and quote you directly. It is free and there is no obligation to appoint anyone.
Get Tree Felling Quotes in Tableview
One description of the tree, several quotes back, no obligation
Free to use, no obligation. Your request goes to tree felling companies covering your area, who quote you directly.
Client Reviews
Powered by leaderr
